11 |
|
| c |
| d |
| e |
h | f |
| b |
| i |
| a |
| g |
Before use
This Wet/Dry shaver can be used for wet shaving with shaving lather or for dry shaving. You can use this water- tight shaver in the shower and clean it in water. Treat yourself to wet lather shaves for at least three weeks and notice the difference.Your Panasonic Wet/Dry shaver requires a little time to get used to because your skin and beard need about a month to adjust to any new shaving method.
Charge the shaver for at least 8 hours before using it for the first time or when it has not been in use for more than 6 months.
Parts identification
(see fig. 1)
AProtective cap
BSystem outer foil
CInner blades
DSystem outer foil release buttons
EPivot action selector
GCharge status lamp
HOn/Off switch
ITrimmer
JTrimmer handle
KAdaptor
LPower cord
MCharging stand
READ ALL INSTRUCTIONS BE- FORE USE.
Charging
Connect the power cord to the shaver, and plug the adaptor to an AC outlet. (see fig. 1 (A))
It will adjust automatically to voltages between
In some areas, a special plug adap- tor may be required.
The charge status lamp will glow when the shaver is being charged. It will flash when the charging is completed.
(For ES8152, see fig. 2)
While charging, the battery capacity monitor will display the charge con- dition (see fig. 2 (A)).
The battery capacity monitor will turn off in about 10 minutes after the charging has been completed (100% level) (see fig. 2 (B)).
You can fully charge the shaver in 1 hour if the battery capacity monitor flashes down to the 20% level.
(For ES8151, see fig. 3)
You can fully charge the shaver in 1 hour if the low battery indicator flashes green (see fig. 3 (A)).
A full charge will supply enough power for approx. 14 shaves (3 min- utes per shave for a normal beard). Before travelling, charge it fully for 1 hour if you will not be taking the adap- tor with you.
In case your shaver is without charge, you may quick charge it for 1 shave in about 5 minutes.
6
7
7
