Charging with the self-cleaning recharger
Thoroughly wipe off any drops of water on or around the recharger so that it is dry before charging it. You can charge without the recharger.
English
3
2
Attach the detergent cartridge and the water tank to the
Page 7
Insert the appliance plug.
Plug in the adaptor.
Remove the protective cap and then attach the shaver.
•Turn the shaver off before attaching.
•Check that the outer foil is not deformed or damaged when you are attaching the shaver.
•The backlight of the LCD panel glows and charging starts.
•Charging is completed when the backlight of the LCD panel blinks.
(Max. 1 hour later)
•You can keep the shaver attached to the recharger, or connected to the adaptor, when not using it to maintain full battery capacity. You cannot overcharge the shaver.
•A special plug adaptor may be required in some areas.
Charging without the
1.Insert the appliance plug into the shaver.
2.Plug in the adaptor into a
household outlet.
5
