Panasonic ES8807 Caution - To prevent personal injury or damage to the product, Specifications

WARNING for Lithium Battery: Fire, explosion, and severe burn hazard.

Do not crush, disassemble, heat above 100°C (212°F), or inciner- ate.

How to remove the built-in rechargeable battery before disposal of the shaver

(see fig. 10)

WARNING:

Do not attempt to replace the bat- tery for the purpose of reusing the shaver.This could result in the risk of fire or electric shock.

The battery in this shaver is not in- tended to be replaced by consum- ers. However, the battery may be re- placed at an authorized service center. The procedure described be- low is intended only for removal of the rechargeable battery for the pur- pose of proper disposal.

1.	Disconnect the power cord from
	the shaver when removing the
	battery.
2.	Remove the bottom cover screw
	(a).
3.	Remove the trimmer (b).
4.	Slide the back panel (c) and re-
	move it.
5.	Remove the side panel (d).
6.	Remove the three housing
	screws (e).
7.	Remove the housing (f).

Caution – To prevent personal injury or damage to the product,

• Do not charge the shaver where it

will be exposed to direct sunlight

or a heat source, or where there is

a lot of moisture.

• Use only the included adaptor

RE7-27 to charge the ES8807

shaver.

• Dry the shaver completely before

charging it.

• The shaver and adaptor will be-

come slightly hot during use or

charging, however, this is not a

malfunction.

• Keep the adaptor away from water

and handle it only with dry hands.

• Grip the adaptor when disconnect-

ing it from an AC outlet; tugging on

the power cord may damage it.

• Store the adaptor in a dry area

where it will be protected from dam-

age.

• Do not pull, twist, or severely bend

the power cord.

• Do not wrap the power cord tightly

around the appliance.

• If the power cord gets damaged, it

alone can not be replaced.

Contact an authorized service

center.

• In cases where static noise is emit-

ted from the television during use

or recharging, connect the adap-

tor to a different outlet.

•Wash the shaver in tap water. Do not use salt water or boiling water. Also, do not use cleaning products that are designed for toilets, bath- rooms or kitchen appliances. Do not submerge the shaver for a long time.

•Do not wipe any part of the shaver with thinner, benzine or alcohol. Clean it by using a cloth dampened with soapy water.

•Do not take the housing apart as this can affect the watertight con- struction.

•Do not clean with water when the shaver is connected to the power cord.

•When cleaning the shaver with water, do so with both the inner blades attached. (Doing so with only one of the inner blades at- tached makes an abnormal noise and may damage the shaver.)

•Keep the unit away from children.

•Keep instructions in a safe place.

•The adaptor is intended to be cor- rectly orientated in a vertical or floor mount position.

Specifications

Power source: 100-240V AC,

50-60 Hz (Automatic voltage conver- sion)

Motor voltage: 3.6 V DC

Charging time: 1 Hour

This product is intended for house- hold use only.

8. Lift the battery (g) and remove it.

• Do not touch the edge (metal part)

of the inner blade.

Failure to observe this may lead to

hand injuries.

FOR YOUR CONVENIENCE, WE HAVE ESTABLISHED A TOLL-FREE (IN USA ONLY) NATIONAL ACCESSORY PURCHASE HOT LINE AT 1-800-338-0552.

FOR CANADA, PLEASE CONTACT ONE OF THE SALES BRANCHES MENTIONED ON THE BACK PAGE.

10	11
	11