Before use
This Wet/Dry shaver can be used for wet shaving with shaving lather or for dry shaving. You can use this water- tight shaver in the shower and clean it in water. The following is the sym- bol of Wet shaver.The symbol means that
Treat yourself to wet lather shaves for at least three weeks and notice the difference. Your Panasonic Wet/ Dry shaver requires a little time to get used to because your skin and beard need about a month to adjust to any new shaving method.
Parts identification
(see fig. 1)
AProtective cap
BSystem outer foil
CInner blades
DSystem outer foil release buttons
EBattery capacity monitor
FCharge status lamp
GOn/Off switch
HTrimmer
ITrimmer handle
JAdaptor
KPower cord
READ ALL INSTRUCTIONS BE- FORE USE.
Charging
Connect the power cord to the shaver, and plug the adaptor into an AC outlet. (see fig. 3)
The shaver will be adjusted automati- cally to voltages between
In some areas, a special plug adap- tor may be required.
•When charging the shaver for the first time or when it has not been in use for more than 6 months, the charge status lamp may not illumi- nate for a few minutes after opera- tion. It will eventually illuminate if kept connected.
Adequate ambient temperature for charging is between 15 to 35 °C.
•If it is far below or over the appropriate temperature, the charging time may be extended, or the adaptor may not function.
•In particular, low temperature may shorten the life span of the rechargeable battery. In this case, the charge status lamp blinks twice in 1 second.
The charge status lamp will glow when the shaver is being charged. The battery capacity monitor will fully illuminate and the charge status lamp will blink after charging is completed (see fig. 2).
10 minutes after charging is com- pleted, the battery capacity monitor will extinguish and the charge status lamp will continue to blink (see fig. 2).
7
7
