Reading the LCD panel when charging
The LCD panel shows the remaining battery capacity from 0% to 100%, in 10% increments.
While charging | After charging is completed |
| Battery capacity and Charge status |
The indicators glow. | will light up and then turn off after 5 |
| seconds. |
•After charging is completed, turning the power switch ON with the shaver plugged in will cause Battery capacity and Charge status to light up and then turn off after 5 seconds. This shows that the shaver is fully charged.
•Recommended ambient temperature for charging is
The indicators on the LCD panel blink when there is a problem with charging.
•When charging the shaver for the first time or when it has not been in use for more than 6 months, the indicators on the LCD panel may not glow. It will eventually glow if kept connected.
Shave
Using the shaver
1 Rotate the lock ring to | 2 Hold the shaver |
unlock the power switch | as illustrated |
and press the power | above and shave. |
switch. |
|
Page 4
•We recommend using the shaver in an ambient temperature range of 5 - 35 °C (41 - 95 °F). If used outside this range, the appliance may stop operating.
Start out shaving by applying gentle pressure to your face. Stretch your skin with your free hand and move the shaver back and forth in the direction of your beard. You may gently increase the amount of pressure as your skin becomes accustomed to this shaver. Applying excessive pressure does not provide a closer shave.
Caution
•If you press the power switch for more than 2 seconds, the sonic vibration cleaning mode is activated. Page 7 You cannot shave in this mode.
•Do not place your fingers on the power switch while using the shaver. This may cause the shaver to turn off or enter the sonic vibration cleaning mode. Place your thumb on the thumb rest while using the shaver.
