Clean
Cleaning the shaver
We recommend that you clean your shaver with the sonic vibration
cleaning mode when the faucet symbol appears on the LCD | |
panel. | |
1. | Disconnect the power cord from the shaver. |
2. | Apply some hand soap and some water to |
Replacing the system outer foil and the inner blades
appears on the LCD panel once a year. (This will differ depending on usage.) We recommend checking the system outer foil and the inner blades when it appears.
Press the Power switch for more than 30 seconds to turn off 
.
system outer foil | once every year |
|
|
inner blades | once every two years |
|
|
English
| the outer foil. |
| |
3. | Rotate the lock ring to unlock the power | 4 | |
| switch. | ||
|
| ||
4. | Press the power switch for more than 2 |
| |
| seconds to activate the sonic vibration |
| |
| cleaning mode. |
| |
| • | appears on the LCD panel. |
|
| • After about 20 seconds, it will be |
|
|
|
|
|
|
| |
| automatically turned off, or you can turn it | 5 |
|
|
| off by pressing the power switch. |
|
|
|
5. | Remove the outer foil section and press the |
|
|
|
| power switch for more than 2 seconds to |
|
|
|
| activate the sonic vibration cleaning mode |
|
|
|
| and clean it with running water. |
|
|
|
6. | Wipe off any drops of water with a dry cloth. |
|
|
|
7. | Dry the outer foil section and the shaver |
|
|
|
| completely. |
|
|
|
8. | Attach the outer foil section to the shaver. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 7 |
|
|
|
|
|
|
|
Replacing the system outer foil
1.Press the foil frame release buttons and lift the outer foil section upwards.
2.Press the system outer foil release buttons and pull down the system outer foil.
3.Align the foil frame mark (
) and the system outer foil mark (
) and securely attach together.
•The system outer foil cannot be reversely attached.
•Always insert the system outer foil to the foil frame when attaching to the shaver.
4.After turning the foil frame mark
(
) to the front, securely attach the outer foil section to the shaver until it clicks.
1 |
2
3
