S P E C F I L E
Ceiling mount bracket for high ceilings
ET-PKD100H
Description
This ceiling mount bracket is to be used when mounting Panasonic projectors to the ceiling.
Specifications |
|
Vertical correction angle: | +5°, |
Horizontal slant correction angle: | ±2.5° |
Horizontal turn correction angle: | ±1.2° |
Dimensions (W x H x D): | 536 x 416.5 – 536.5 x 425 mm |
| |
Weight: | 16.6 kg (36.6 lbs) |
Weights and dimensions shown are approximate. Specifications subject to change without notice.
Parts | Attachment plate | 1 |
| Projector mount bracket | 1 |
| Adjuster poles | 2 |
| Angle adjuster | 1 |
| Pole support bracket 1 | 1 |
| Pole support brackets 2 | 2 |
| Pole fixer | 1 |
| Hexagonal bolt (M6 x 110) | 1 |
Spring washer (M6) | . 1 |
Nut (M6) | . 1 |
36 | |
Sealing packing | . 1 |
. 5 | |
Washers (M6) | . 2 |
Hex nuts (M6) | . 2 |
Sealing packing | . 1 |
C a u t i o n :
Mounting should be done by a qualified technician. Make sure that the mounting (ceiling) area has sufficient strength. Read the enclosed mounting instructions thoroughly before starting.
Dimensions |
|
Illustration shows the | Attachment plate |
Attachment plate |
| |||
| Ø60.5 | |||
|
|
|
| |
|
|
|
| |
|
|
|
| (22 |
290
Projector
|
| 54 | 344 | |
|
|
| (2 |
|
87.5 |
|
|
|
|
150 | Attachment plate | |||
|
| |||
|
|
|
|
440
200 | 314 | 344 |
175 | 62.5 |
200 | 50 |
300 |
|
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
As of December 2006 |
| < 1 > |