d
s
]
First time Auto Tuning
Automatically sets up the TV and searches for available TV channels when the TV is turned on for the first time.
●These steps are not necessary if the setup has been completed by your local dealer.
●Please complete connections (p. 7 - 10) and settings (if necessary) of the connected equipment before starting Auto Tuning. For details of settings for the connected equipment, read the manual of the equipment.
1 Plug the TV into mains socket and turn power on
●Takes a few seconds to be displayed.
2 Select the following items
Set up each item by following the
Select your language
Select [Home]
Select [Home] viewing environment to use in your home environment.
●[Shop] is for shop display.
●To change viewing environment later on, you will need to initialise all settings by accessing Shipping Condition.
Set up the network connection Select your country
Select your area
●When selecting [CATV/Other], press the OK button, and then select the Channel Plan from Indian CATV, South Africa, American System, American CATV or Japan CATV.
3 | Select the type of [Home Screen] |
|
The demonstration to explain how to use [my Home Screen] is displayed. Confirm the demonstration by | ||
| following the | |
| Example: [Home Screen Selection] | Example: [TV Home Screen] |
●[my Home Screen] is the
Auto Tuning is now complete and your TV is ready for viewing.
If tuning has failed, check the connection of the network, RF cable, and then follow the
Note
●The TV will automatically go into Standby mode when no operation is performed for 4 hours if [Auto Standby] in the Timer Menu is set to [On].
●The TV will automatically go into Standby mode when no signal is received and no operation is performed for 10 minutes if [No signal Power off] in the Timer Menu is set to [On].
●To retune all channels [Auto Tuning] in [Tuning Menu] (Setup Menu)
●To initialise all settings [Shipping Condition] in [System Menu] (Setup Menu)
13
