Viewing 3D images

You can enjoy viewing 3D images with contents or programmes corresponding to the 3D effect by wearing the 3D Eyewear (supplied).

The 3D Eyewear must be worn to view 3D images.

This TV supports [Frame Sequential]*, [Side by Side] and [Top and Bottom] 3D formats.

*: The 3D format that the images for the left and right eyes are recorded with the high definition quality and alternately played back.

To view the 3D images

Playing back 3D-compatible Blu-ray disc (Frame Sequential format)

Connect the 3D-compatible player via a fully wired HDMI compliant cable. (If you use the non 3D-compatible player, the images will be displayed in 2D mode.)

If the input mode is not switched automatically, select the input mode connected to the player using the AV button.

3D photos and 3D videos taken by 3D-compatible Panasonic products

Available in Media Player and Network services.

2D images converted to 3D

Press the 3D button and set to [2D3D] mode in [3D Mode Selection].

1

2

Put the 3D Eyewear on

View the 3D images

Safety precautions will be displayed when you first watch the 3D image. Select [Yes] or [No] to continue to view 3D images.

To change 2D - 3D mode

Note

Do not exert pressure on or scratch the lens of the 3D Eyewear.

3D content will not be correctly visible if the 3D Eyewear is worn upside down or back-to-front.

When viewing 3D images, make sure your eyes are at an approximately horizontal level and keep a position where you do not see double images.

16

Page 16
Image 16
Panasonic ET60M quick start Viewing 3D images, Put the 3D Eyewear on View the 3D images, To view the 3D images