[POSITION] menu
Aspect mode | Screen |
|
|
| Input signal |
[FULL]
Outputs the image by using whole effective area of the image
signals output from Projection screen the <DIGITAL LINK>
terminal.
Input signal
[NATIVE] Outputs the image in
the resolution of the
input signal without Projection screen resizing.
Input signal
[H FIT]
Outputs the image with the aspect ratio fixed and by using whole effective area
in the horizontalProjection screen direction of the image
signals output from the <DIGITAL LINK> terminal.
Aspect mode | Screen |
|
|
| Input signal |
[V FIT]
Outputs the image with the aspect ratio fixed
and by using whole effective area in the
vertical direction of the Projection screen image signals output
from the <DIGITAL LINK> terminal.
[INPUT RESOLUTION]
You can adjust to achieve an optimal image when there is a flickering image or smeared outlines.
1)Press ▲▼ to select [INPUT
RESOLUTION].
2)Press the <ENTER> button.
zzThe [INPUT RESOLUTION] screen is displayed.
3)Press ▲▼ to select [TOTAL DOTS ], [DISPLAY DOTS], [TOTAL LINES], or [DISPLAY LINES], then press ◀▶ to
adjust it.
zzValues corresponding to the input signal are displayed automatically for each item. Change the displayed values and adjust to the optimal point viewing the screen when there is a vertical banding or missing in the screen.
Note
zzPreviously mentioned vertical banding will not occur with all white signal input.
zzThe image may be disrupted while performing the adjustment, but it is not a malfunction.
zz[INPUT RESOLUTION] can be adjusted only when a signal is input to the <COMPUTER 1 IN> terminal or the <COMPUTER 2 IN> terminal.
34 - ENGLISH