.GENERAL SAFE
- TY RULES - FOR ALL BATTERY OPERATED TOOLS
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS.
Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.
SAVE
THESE
INSTRUCTIONS
Work Area
1)Keep your work area clean and well lit.
Cluttered benches and dark areas invite accidents.
2)Do not operate power tools in explosive atmospheres, such as in the presence of flammable liq- uids, gases, or dust.
Power tools create sparks which may ignite the dust or fumes.
3)Keep bystanders, children, and vis- itors away while operating a power tool.
Distractions can cause you to lose control. Make sure that no one is beneath, or on the other side of the area when you are working.
Electrical
Safety
4)A battery operated tool with integral batteries or a separate battery pack must be recharged only with the specified charger for the battery.
A charger that may be suitable for one type of battery may create a risk of fire when used with another battery.
5)Use battery operated tool only with specifically designated bat- tery pack.
Use of any other batteries may cre- ate a risk of fire.
Personal Safety
6)Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use tool while tired or under
the influence of drugs, alcohol, or medication.
A moment of inattention while operat- ing power tools may result in serious personal injury.
7)Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts.
Loose clothes, jewelry, or long hair can be caught in moving parts.
8)Avoid accidental starting. Be sure switch is in the locked or off posi- tion before inserting battery pack.
Carrying tools with your finger on the switch or inserting the battery pack into a tool with the switch on invites accidents.
9)Remove adjusting keys or wrenches before turning the tool on.
A wrench or a key that is left attached to a rotating part of the tool may result in personal injury.
10)Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enable better control of the tool in unexpect- ed situations.
11)Use safety equipment. Always wear eye protection.
Dust mask,
Tool
use and care
12)Use clamps or other practical way to secure and support the work- piece to a stable platform.
Holding the work by hand or against your body is unstable and may lead to loss of control.
13)Do not force tool. Use the correct tool for your application.
The correct tool will do the job better and safer at the rate for which it is designed.
14)Do not use tool if switch does not turn it on or off.
A tool that cannot be controlled with the switch is dangerous and must be repaired.
15)Disconnect battery pack from tool or place the switch in the locked or off position before making any adjust- ments, changing accessories, or stor-
- 2 -
