VII.LAMP Indications Specifications | Panasonic EY6105 instruction

CAUTION:

•Do not use power source from an engine generator.

•Do not cover vent holes on the charger.

•Do not use the battery adapter EY0890 with battery charger EY0005.

VII.LAMP INDICATIONS

X.SPECIFICATIONS

MAIN UNIT: EY6105

Model			EY6105
Motor			DC Motor 12 V
No load speed		LOW	45 - 300 /min (rpm)
No load speed		HIGH	165 - 1100 /min (rpm)
		HIGH	165 - 1100 /min (rpm)
Chuck capacity			ø0.8 - ø10 mm (0- 3/8")
	Stage 1 -18		Approx. 0.5 Nm, (5 kgf-cm, 4.3 in-lbs) -
Cluch setting	Stage 1 -18		4.4 Nm, (45 kgf-cm, 39.0 in-lbs)
Cluch setting			4.4 Nm, (45 kgf-cm, 39.0 in-lbs)
			For powerful driving and drilling.
Overall length			199 mm (7-13/16")
Weight (with battery pack)			1.4 kg, (3.1 Ibs)

Red Flashing

Red Lit

Red Flashing quickly

Charger is plugged into the AC outlet. Ready to charge.

Battery pack is warm. Charging will begin when temperature of battery pack drops.

Charging is not possible. Clogged with dust or malfunction of the battery pack.

Now charging

Charging is completed.

RECOMMENDED WORK CAPACITIES AND SPEED SELECTION

Model		EY6105	Speed Select
Screw	Wood Screw	ø 5.8 mm (1/4") x 38 mm (1-1/2")	Low
driving	self-drilling screw	ø 6.0 mm (1/4") x 13 mm (1/2") SPC t = 2.3 mm (1/16")	High
	self-drilling screw	ø 6.0 mm (1/4") x 13 mm (1/2") SPC t = 2.3 mm (1/16")	High
Drilling	For Wood	ø 20 mm (13/16") Yellow pine t = 20 mm (13/16")	Low
Drilling	For Metal	ø 6.5 mm (1/4") SPC t = 1.6 mm (1/16")	High
	For Metal	ø 6.5 mm (1/4") SPC t = 1.6 mm (1/16")	High

BATTERY PACK: EY9005

VIII. MAINTENANCE

Use only a dry, soft cloth for wiping the unit. Do not use a damp cloth, thinner, benzine, or other volatile solvents for cleaning.

BATTERY RECYCLING

ATTENTION:

FOR Ni-Cd Battery Packs, EY9005

A nickel cadmium battery that is recycleable powers the product you have purchased. At the end of its useful life, under various state and local laws, it is illegal to dispose of this battery into your municipal waste stream.

Please call 1-800-8-BATTERY for information on how to recycle this battery.

IX. ACCESSORIES

Use only bits suitable for size of drill's chuck.

Model	EY9005
Storage battery	Ni-Cd Battery
Battery voltage	12V DC (1.2V X 10 cells)

EY9005 : Only charge with battery charger EY0005.

BATTERY CHARGER: EY0005

Model	EY0005
Electrical rating	See the rating plate on the bottom of the charger.

Weight			0.57 kg,(1.26 lbs.)
		7.2 V	9.6 V	12 V
		EY9065	EY9080	EY9001
	1.2 Ah	EY9066	EY9086	EY9005, EY9006
			30min.
Charging time			EY9180	EY9101
Charging time	1.7 Ah		EY9182
			45 min.
	2.0 Ah			EY9106
	2.0 Ah			50 min.
				50 min.

NOTE: This chart may include models that are not available in your area. Please refer to the catalogue.

CAUTION: • Do not use the battery adapter EY0890 with battery charger EY0005.

•Do not charge other Panasonic battery packs except for the battery packs as shown above.

— 10 —

— 11 —

Panasonic EY6105 VII.LAMP Indications Specifications, VIII. Maintenance, IX. Accessories

Models: EY6105