5
4 Disassembly and Assembly Instructions

4.1. Disassembly Instructions

Ref. No. 1A Procedure 1A Removal of the Housings.
1. Loosen the belt hook bolt turning it counterclockwise, using a coin
or a flat blade screwdriver.
2. Take out the belt hook.
3. Remove four screws where tightening fixing cover.
4. Remove eight housing screws.
5. Pull off the fixing cover assembly.
6. Once removing the clutch handle, the out-put shaft may come out.
7. Remove torque click spring and click spring.
8. Then open the housing A and B.