List of components
Part name | Drawing | Quantity |
Wall sleeve |
| 1 |
Screw I (4 x 30) |
| 4 |
Mounting plate |
| 1 |
Screw II (4 x 6) (for new |
| 2 |
construction only) |
| |
|
|
Part name | Drawing | Quantity |
Screw III (4 x 8) |
| 1 |
Template (Pattern paper) |
| 1 |
| Exterior hood | 1 |
| Externsion sleeve | 1 |
Description
This Panasonic wall mounted ventilating fan uses a propeller fan driven by a capacitor motor. The motor is designed for extended service life with reduced energy consumption.
It also incorporates a
Reference installation drawing
Wall thickness: 114.3 - 152.4 mm (4.5 - 6") No extension sleeve is used.
When the wall thickness is between 152.4 mm (6") and 254 mm (10"), mount the extension sleeve as shown below. When the wall thickness is more than 254 mm (10"), prepare an extension sleeve with an inner diameter of 207 mm (8 5/32") and a length of wall thickness minus 127 mm (5"), and mount it as shown below. (The seam should be covered with aluminum tape.)
| Flexible | Interior wall | Flexible conduit | Interior wall |
Exterior wall | conduit | Junction box | Exterior wall | Junction box |
|
| Connector | Extension | Connector |
|
| sleeve | ||
|
|
|
| |
Exterior |
|
| Exterior |
|
hood |
|
| hood |
|
|
| Main unit |
|
| Main unit |
Outdoor | Wall sleeve | Indoor | Outdoor | Wall sleeve | Indoor |
| Wall |
|
| Wall |
|
| thickness |
|
| thickness |
|
2