Machine Vision Camera
GP-MF852PT
Before attempting to connect or operate this product, please read these instructions completely.
5.Clean the CCD faceplate with care.
Do not clean the CCD with strong or abrasive detergents. Use lens tissue or a cotton tipped applicator and ethanol.
6.Never face the camera towards the sun. Do not aim the camera at bright objects. Whether the camera is in use or not, never aim at the sun or other extremely bright objects. Otherwise, blooming or smear may be caused.
7.Do not drop anything inside the camera. Dropping metal for example inside the cam- era could permanently damage the unit. If anything is dropped inside the camera, turn the power off immediately and ask a qualified service person for servicing.
8.Do not operate the camera beyond the specified temperature, humidity or power source ratings.
Use the camera under conditions where tem- perature is between −10°C - +50°C (14°F - 122°F), and humidity is below 90 %.
The input power source is DC 12 V, 465 mA.
YWV8QA5088AN Printed in Japan | |
| N 30 |
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
t i !0 u r y o !1
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK), NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral trian- gle, is interned to alert the user to the presence of uninsulated "dan- gerous voltage" within the product's enclosure that may be of sufficient
SA 1965 magnitude to constitute a risk of electric shock to persons.
Remove dust on the faceplate of filter glass before mounting the lens on the camera.
For U.S.A
Warning:
This equipment generates and uses radio frequen- cy energy and if not installed and used properly, i.e., in strict accordance with the instruction manu- al, may cause harmful interference to radio com- munications. It has been tested and found to com- ply with the limits for a Class A computing device pursuant to Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protec- tion against such interference when operated in a commercial environment.
The serial number of this product may be found on the top of the unit.
ON
1 2 3 4 5 6 7 8
q
VIDEO
w
e
| The exclamation point within an |
| equilateral triangle is intended to |
| alert the user to the presence of |
| important operating and mainte- |
| nance (servicing) instructions in the |
| literature accompanying the appli- |
SA 1966 | ance. |
|
You should note the serial number of this unit in the space provided and retain this book as a perma- nent record of your purchase to aid identification in the event of theft.
Model No.
Serial No.
q2/3” Manual Iris Lens (Sold Separately)
wCamera Connector (12-pin)
This is connected with the optional Camera Cable
8. | Rear Panel Switch No.4 (4/ON) 4 |
|
| ON |
9. | Rear Panel Switch No.5 (5/ON) 5 |
|
| ON |
|
| |||
| These switches (Rear Panel Switch No. 4, 5, | |||
| 6, and 7) are used to set the shutter speed. | |||
| The shutter speed changes according to the | |||
| mode which is set by the Rear Panel Switch | |||
WARNING:
TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION: CONNECT
q o | THIS TO A DC 12 V | |
CLASS 2 POWER | ||
w !0 i | ||
SUPPLY ONLY. | ||
e !1!2 u | ||
|
No. 2, 3, and 8. |
|
10. Rear Panel Switch No.6 (6/ON) 6 | ON |
PREFACE
The Panasonic
FEATURES
1. | Newly developed 2/3” double speed progres- | 4. | Frame reset with Read out Inhibit (R/I) |
| sive scan type CCD image sensor with 768 |
| control : |
| (H) x 494 (V) pixels. |
| R/I control (this controls the timing of Readout |
|
|
| Inhibition from CCD) enables to capture the |
2. | External synchronization : |
| same timing pictures from two or more cam- |
| External HD/VD input enables system setup |
| eras into one image memory. |
| with external video processors, etc. |
|
|
|
| 5. | In all camera function modes, high speed |
r t y
Pin No. | Description |
1 | Ground |
2 | +12V IN |
3 | Ground for Video Out |
4 | Video Out |
5 | Ground for HD |
6 | HD IN |
7 | VD/V reset |
8 | Ground |
9 | No connection |
10 | No connection |
11 | No connection |
12 | Ground for VD |
3.Video Output Connector
This connector is used to connect with the VIDEO IN connector of the monitor.
11. Rear Panel Switch No.7 (7/ON) 7 |
|
| ON |
The shutter speed can be set as below:
Rear Panel Switch |
| Mode |
| ||||
|
|
|
|
|
|
|
|
No.4 | No.5 | No.6 | No.7 | Mode 7 |
| Mode |
|
|
|
|
|
|
|
|
|
OFF | OFF | OFF | OFF | Normal |
| Not Specified |
|
|
|
|
|
|
|
|
|
ON | OFF | OFF | OFF | 1/100 |
| Not Specified |
|
|
|
|
|
|
|
|
|
OFF | ON | OFF | OFF | 1/250 |
| Not Specified |
|
|
|
|
|
|
|
|
|
ON | ON | OFF | OFF | 1/500 |
| Not Specified |
|
|
|
|
|
|
|
|
|
OFF | OFF | ON | OFF | 1/1 000 |
| Not Specified |
|
|
|
|
|
|
|
|
|
ON | OFF | ON | OFF | 1/2 000 |
| 1/2 000 |
|
|
|
|
|
|
|
|
|
OFF | ON | ON | OFF | 1/4 000 |
| 1/4 000 |
|
|
|
|
|
|
|
|
|
ON | ON | ON | OFF | 1/8 000 |
| 1/8 000 |
|
|
|
|
|
|
|
|
|
OFF | OFF | OFF | ON | 1/15 000 |
| 1/15 000 |
|
|
|
|
|
|
|
|
|
ON | OFF | OFF | ON | 1/30 000 |
| 1/30 000 |
|
|
|
|
|
|
|
| |
Other Combinations | Not Specified | Not Specified |
| ||||
