4.To stop the screen saver, press the R button on the remote control.
Figure 50
Side Bar Brightness adjustment
This feature allows the customer to adjust the brightness of the
Figure 51
1. Press the Setup button on the remote control.
Figure 52
2.Use the Up/Down arrow buttons to highlight Side bar adjust, then press the action button.
Figure 54 | Figure 53 |
3.Use the Left/Right Arrow buttons to select the desired setting, Off ? Dark ? Mid ? Bright.
Note: Setting the side bar to Bright may cause a flashing effect depending on the image being displayed. Also Bright sidebars may cause an after image.
4.Press the R button on the remote control to exit this menu.
Figure 55
54
