20
Adjusting PICTURE POSITION / SIZE
NORMAL
NORMALIZE
PICTURE POS. /SIZE
V-POS
H-POS
V-SIZE
H-SIZE
CLOCK PHASE
1Press to display the PICTURE POS. /SIZE menu.
Press to adjust POS. / SIZE.
Press to exit from adjust mode.
Press to select H-POS / H-SIZE / V-POS / V-SIZE / CLOCK PHASE.
During “VIDEO (S VIDEO)”,
“COMPONENT” and “DVI” input signal.
During “RGB / PC” input signal.
3
2
Notes:
•Adjustment details are memorized separately for different input signal formats
(Adjustments for component signals are memorized for 525 (480) / 60i · 60p, 625
(575) / 50i · 50p, 1125 (1080) / 60i · 50i · 24p
· 25p · 30p
· 24sF, 1250 (1080) / 50i,
750 (720) / 60p · 50p each, and RGB/PC/DVI signals are memorized for each
frequency.)
•If a “Cue” or “Rew” signal from a VCR or DVD player is received, the picture
position will shift up or down. This picture position movement cannot be controlled
by the PICTURE POS. / SIZE function.
•If adjusting the PICTURE V-POS / V-SIZE in Panasonic AUTO with FULL mode,
the adjustment is not memorized. When exiting the mode, the screen will return to
a former adjustment.
While the PICTURE POS. / SIZE display is active, if either the N button on the remote control is pressed at any time or
the ACTION ( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.
Helpful Hint (
N
/
NORMALIZE
Normalization)
Adjust the horizontal size.
Adjust the vertical size.
H-POS
V-POS
Adjust the horizontal position.
Adjust the vertical position.
H-SIZE
V-SIZE
CLOCK PHASE
(RGB/PC in mode)
Eliminate the flickering and distortion.
4
R
PICTURE
POS. /SIZE
NORMAL
NORMALIZE
PICTURE POS. /SIZE
V-POS
H-POS
V-SIZE
H-SIZE
N R
INPUT
SURROUND
VOL
PICTURE SOUND SET UP
ASPECT
PICTURE
POS. /SIZE
OFF TIMER
PC
MULTI
PIP SWAP SELECT MOVE
ZOOM