31
Press to select “ON” or “OFF”.
Press to select
“POWER SAVE”
“STANDBY SAVE”
“POWER MANAGEMENT”
“AUTO POWER OFF”.
Reduces power consumption
• POWER SAVE: When this function is turned ON, luminous level of the plasma display is suppressed, so
power consumption is reduced.
• STANDBY SAVE: When this function is turned ON, power consumption of the microcomputer is reduced
during power supply standby (see page 13-15), so standby power of the set is reduced.
• POWER MANAGEMENT: The unit power supply is turned ON or OFF depending on whether or not there is a signal
during PC input mode.
This function is enabled when it is turned ON. (Only during input from PC(Mini D-sub)
terminal)
• AUTO POWER OFF: Equipment power supply is turned OFF when there is no signal.
When this is set to On, the power supply of the unit goes Off 10 minutes after the input
signals stop.
This function is effective for input signals except input from PC (Mini D-sub) terminal.
Press to exit from SET UP.
Press to select INPUT LABEL.
Press to change the INPUT LABEL.

Customizing the Input labels

This function can change the label of the Input signal to be displayed.
Notes:
While selecting a Input signal through Optional Terminal Board connected to Slot 1 to Slot 3, the Input label will depend on
each Optional Terminal Board.
INPUT LABELS for Slot 1 to Slot 3 and miniD-sub:
[Slot1 Input] INPUT1/VIDEO1/COMPONENT1/RGB1/DIGITAL1/PC1/DVD1/CATV1/VCR1/STB1
[Slot2 Input] INPUT2/VIDEO2/COMPONENT2/RGB2/DIGITAL2/PC2/DVD2/CATV2/VCR2/STB2
[Slot3 Input] INPUT3/VIDEO3/COMPONENT3/RGB3/PC3/DVD3/CATV3/VCR3/STB3
[PC (MiniD-sub) input] PC/COMPONENT/RGB/DVD/STB
ON OFF
Note:
“POWER MANAGEMENT” and “AUTO POWER OFF” are effective during normal viewing (one picture screen) only.
SET UP
1/2
PC
OFF
STANDBY SAVE OFF
POWER MANAGEMENT
OFF
AUTO POWER OFF OFF
OSD LANGUAGE ENGLISH (US)
COMPONENT / RGB-IN SELECT
RGB
INPUT LABEL
SIGNAL
POWER SAVE
SET UP
1/2
PC
OFF
STANDBY SAVE OFF
POWER MANAGEMENT
OFF
AUTO POWER OFF OFF
OSD LANGUAGE ENGLISH (US)
COMPONENT / RGB-IN SELECT
RGB
INPUT LABEL
SIGNAL
POWER SAVE
SET UP
1
2
3