∫Attaching the Lens Hood (Supplied Accessory)
Insert the lens hood into the lens with the short sides at the top and bottom, and turn in the direction of the arrow until it stops.
E: Fit to the mark
∫Temporarily Storing the Lens Hood
1 Turn the lens hood in the direction of the arrow to detach it.
2 Reverse the lens hood and then attach it in the same way as shown previously.
•Hold the short sides of the flower shape lens hood when attaching or detaching it.
•When taking pictures with the flash with the lens hood attached, the lower portion of the screen may turn dark (vignetting effect) and the control of the flash may be disabled because the photo flash may be obscured by the lens hood. We recommend detaching the lens hood.
•When using the AF assist lamp in the dark, detach the lens hood.
∫Attaching Filters
≥Vignetting may occur if using 2 or more MC protectors (optional:
≥The filter may become impossible to remove if excessively tightened, so please refrain from tightening it too strongly.
≥It is possible to attach the lens cap with the filter already attached.
≥You cannot attach a conversion lens or adaptor to this lens. A filter may be used, but attaching any other element may cause damage to the lens.
7
VQT4G28
