27
VQT3J56
≥Perform the touch screen calibration when the touch is not recognized or wrong location is
recognized. (l46)
When the unit is turned on for the first time, a message asking you to set the date and time
will appear.
Select [YES] and perform steps 2 to 3 below to set the date and time.
1Select the menu. (l39)
2Touch the date or time to be set, then set the desired value using
/.
ADisplaying the World time setting (l40):
[HOME]/ [DESTINATION]
≥The year can be set between 2000 and 2039.
≥The 12-hour system is used to display the time.
3Touch [ENTER].
≥A message prompting for World time setting may be
displayed. Perform the World time setting by touching the screen. (l40)
≥Touch [EXIT] to complete the setting.
≥The date and time function is driven by a built-in lithium battery.
≥When this unit is purchased, the cl ock is set. If the time display becomes [- -], the built-in
lithium battery needs to be charged. To re charge th e built-i n lithium batt ery, connect the AC
adaptor or attach the battery to this unit . Le ave t he uni t as it is fo r ap prox. 24hours and the
battery will maintain the date and time for approx. 4months. (The battery is still being
recharged even if the unit is off.)
Preparation
Setting date and time: [SETUP] # [CLOCK SET]
MENU
HDC-SD90&TM90-P-VQT3J56_mst.book 27 ページ ２０１１年１月１３日 木曜日 午前９時１８分