78
VQT3J56
4Adjust the 3D Conversion Lens attachment part following the
instructions on the screen.
≥2 screens will appear.
5Touch [EXIT] to end the adjustment.
≥After adjustment, a single screen appears.
≥When re-attaching the 3D Conversion Lens or
after an impact etc., it is recommended that you
perform the adjustmen t again.
6Press the recording start/stop button to
start recording.
≥Start recording after removing the Lens front cap.
≥When the 3D Conversion Lens is attached, the zoom position is fixed, and the zoom
operation is disabled.
≥When recording in 3D, the image will appear with gray frame around it. The gray frame will
be recorded in the video.
≥Use of a tripod is recommended for recording with a stable picture.
≥[ECONOMY] will not work while you adjust the 3D Conversion Lens attachment position.
≥When the 3D Conversion Lens is attached, the auto slow shutter setting is [AUTO SLOW
SHTR (3D)]. The default setting of [AUTO SLOW SHTR (3D)] is [ON]. (l65)
≥While 3D recording if moving the unit fast, the message is more likely to appear.
≥If the unit is turned on in the shade, etc., the screen may appear to be blue. In such a case,
removing the lens cap will return the screen to normal.
To ensure that the 3D video can be safely viewe d , pay att e n t io n t o th e foll owing
points when recording.
≥Where possible, record with the unit in a horizontal state.
≥Do not get too close to the subject. (record from a distance of at least 1.2m (3.9 feet).)
≥When moving the unit as you record, move it slowly.
≥Try to hold the unit as steady as possible when recording while riding in a vehicle or
walking.
3D
0h00m00s0h00m00s0h00m00s
R 1h20mR 1h20mR 1h20m
HG
A appears.
3D
HDC-SD90&TM90-P-VQT3J56_mst.book 78 ページ ２０１１年１月１３日 木曜日 午前９時１８分