9
(ENG) VQT3J65
Charging the battery
The unit is in the standby condition when the AC adaptor is connected. The primary circuit is
always “live” as long as the AC adaptor is connected to an electrical outlet.
Important:
≥Use the supplied AC adaptor. Do not use the AC adaptor of another device.
≥Do not use the AC cable with any other equipment as it is designed only for this unit.
Also, do not use the AC cable from other equipment with this unit.
≥The battery can also be charged using a battery charger (VW-BC10E; optional).
≥The battery will not be charged if the unit is turned on.
≥It is recommended to charge the battery in a temperature between 10oC to 30 oC.
(The battery temperature should also be the same.)
ADC input terminal
≥Insert the plugs as far as they will go.
1Connect the AC adaptor to the DC input terminal.
≥Be careful not to pinch the DC input terminal cover.
2Connect the AC cable to the AC adaptor, then the AC outlet.
≥The status indicator will flash red at an interval of 2 seconds, indicating that charging has
begun.
It will turn off when the charging is completed.
∫Connecting to the AC outlet
It is possible to use this unit with power supplied from the AC outlet by turning on the unit with
the AC adaptor connected.
When this unit is purchased, the battery is not charged. Charge the battery fully
before using this unit.
HDC-SD90&TM90_EP-VQT3J65_mst.book 9 ページ ２０１１年１月１４日 金曜日 午後２時４１分