LOREX Technology LW2201 instruction manual Wireless Receiver, Rear Panel

Wireless Receiver

Wireless Receiver

1.Wireless Antenna: Connects to the back of the receiver.

2.Channel LEDs: When lit in green, indicates the active viewing mode.

3.VGA/QVGA* button: Press to switch between VGA and QVGA video resolutions; press and hold for several seconds to remove/replace channels from Auto-Scan. See page 14 for more details.

4.Front LED: Lit in green to indicate power to the receiver.

5.Pair: Press to switch between CH1~4, Quad split-screen mode, and Auto-Scan viewing mode; press and hold to add (pair) a camera to the receiver.

1

2

VGA	Pair
/
QVGA

Rear Panel

6.	Port: Not used.	3	4	5
7.	Antenna jack: Connection for the wireless antenna.
		Figure 1.0 Wireless receiver – front

67

Figure 1.1 Wireless receiver – rear

*VGA (Video Graphics Array) has a resolution of 640X480; QVGA (Quarter Video Graphics Array) has a resolution of 320X240.

9