On-Screen Display
1.Signal Indicator – The signal indicator shows the strength of the signal being received from the camera.
The number of bars in the Signal Indicator shows the strength of the signal – One or No Bars indicates the signal is poor, and 4 bars indicate a very strong signal.
Note: Signal Indicator not shown while in Quad Mode.
ATTENTION: If signal is low (e.g. 1 or 2 bars) adjust the antennas, or reposition the cameras or receiver for best performance.
2.Channel Indicator – Displays the current channel number. Press the Pair button on the Receiver to switch between available cameras.
Note: Channel Indicator not shown while in Quad Mode.
CH 1 |
| CH 2 |
|
|
|
CH 3 |
| CH 4 |
|
|
|
|
|
|
3.Status Indicator – The Status indicator message “Connecting” appears when the receiver is trying to locate a camera.
Note: There may be temporary signal losses for less than 1 second, due to the connection retrieval process between the Camera and Receiver (when switching between channels). This normal and should not be considered a defect.
1 2
Figure 4.0 On-screen display
Figure 4.1 Quad split-screen view
3
Figure 4.2 Connecting message
13
