Setting up the Wireless Receiver
Setting up the Wireless Receiver
To set up the wireless receiver:
1.Screw on the antenna to the back of the receiver.
2.Connect the Yellow video cable and White audio cable (mono) to your TV, DVR, or observation system. Use the RCA/BNC Adapter (included) to connect the video cable to a BNC port.
3.Connect the Black power cable from the receiver to the cable of the Power Adapter; plug the Power Adapter to an outlet or surge protector.
4.Place the receiver in a place that will have a clear reception to your camera*.
Note: Use the included
ATTENTION: Make sure to first connect and power on the cameras before powering on the monitor; this will ensure a proper connection.
Connecting the Camera
Before you install the camera, carefully plan where and how it will be positioned, and where you will route the cable that connects the camera to the power adapter.
•Before starting permanent installation, verify its performance by observing the image on a monitor when camera is positioned in the same location/position where it will be permanently installed.
Installation Warnings:
•Aim the Cameras to best optimize the viewing area: Select a location for the camera that provides a clear view of the area you want to monitor, which is free from dust, and is not in
•Avoid installing the cameras where there are thick walls or obstructions between the Cameras and the Receiver*.
•Select a location for the camera that has an ambient temperature between 14°F~113°F
*Avoid installing in a location which requires the wireless signal to pass through cement, concrete, and metal structures. This will reduce the range of transmission.
11
