18 VQT2Z95
Caution:
Check that the status indicator has gone off.
1Open the card/battery door and insert (remove) the
SD card into (from) the card slot B.
≥Face the label side C in the direction shown in the illustration and
press it straight in as far as it will go.
≥Press the center of the SD card and then pull it straight out.
2Securely close the card/battery door.
≥Do not touch the terminals on the back of the SD card.
≥Do not apply strong shocks, bend, or drop the SD card.
≥Electrical noise, static electricity or the failure of this unit or the SD card
may damage or erase the data stored on the SD card.
≥When the status indicator is lit, do not:
jRemove the SD card
jTurn the unit off
jInsert and remove the USB terminal
jExpose the unit to vibrations or shock
Performing the above while the lamp is on may result in damage to
data/SD card or this unit.
≥Do not expose the terminals of the SD card to water, dirt or dust.
Inserting/removing an SD card
When using an SD card not from Panasonic, or one previously used
on other equipment, for the fir st time on this unit, format the S D card.
(l35) When the SD card is formatted, all of the recorded data is
deleted. Once the data is deleted, it cannot be restored.
Status indicator A
≥When this unit is
accessing the SD card,
the status indicator
lights up.
HM-TA1_PP-VQT2Z95_mst.book 18 ページ ２０１０年７月２７日 火曜日 午後９時２０分