56 VQT2Z95
This unit cannot be
operated though it is
turned on.
This unit does not
operate normally.
Remove the battery, wait about
1 minute and then insert the battery.
Then about 1 minute later, turn on the
unit again. (Conducting the above
operation while the SD card is being
accessed may damage the data on
the SD card.)
If normal operation is still not
restored, remove the battery and
contact consumer support. (l74, 75)
The unit arbitrarily
stops recording.
Use an SD card that can be used for
motion picture recording. (l16)
The recordable time may have
shortened due to the deterioration of
the data writing speed or repeated
recording and deletion. Using the
unit, format the SD card. (l35)
Scenes/still pictures
cannot be played
back.
Any scenes/still pictures where the
thumbnails are displayed as
cannot be played back.
Although this unit is
correctly connected
to a TV, images
cannot be seen.
The images are
squeezed
horizontally.
Please read the operating
instructions of your TV and select the
channel that matches the input used
for the connection.
Change the [TV ASPECT] setting to
match the aspect ratio of the TV.
(l37)
Problem Check points
HM-TA1_PP-VQT2Z95_mst.book 56 ページ 2010年7月27日 火曜日 午後9時20分