Suggested Tool Requirements
SCREWDRIVER(+,
PREPARATION OF CHASSIS
1.Remove the screws which fasten the cabinet at both sides and at the back.
2.Slide the unit out from the cabinet by gripping the base pan handle and pulling forward while bracing the cabinet.
3.Cut the window sash seal to the proper length. Peel off the backing and attach the
Shipping screws |
Fig. 1 |
4. Remove the backing from
5. Attach the Top retainer bar on the top of the cabinet with 3 screws (Type A).
Fig. 2
Features
6.Insert the Frame guides into the bottom of the cabinet.
7.Insert the Frame Curtain into the Top retainer bar and Frame guides.
8.Fasten the curtains to the unit with 10 screws (Type A) at both sides.
| Top retainer bar | |
Fig. 3 |
Top retainer bar |
|
Screw |
|
(Type A) | Screw(Type A) |
Frame guide | Fig. 4 |
and Installation
11