Panasonic HQ-2243TH manual Cabinet Installation, Caution Do Not Drill A Hole In The Bottom Pan

Cabinet Installation

1. Open the window. Mark a line on the center

of the window stool between the side

window stop moldings.

Loosely attach the sill bracket to the support

bracket using the carriage bolt and the lock

nut.

Sill
Bracket	Support
	Bracket

Carriage

Bolt Lock nut (M-Screw)

Fig. 5

2. Attach the sill bracket to the window sill

using the screws (Type B).

Carefully place the cabinet on the window

stool and align the center mark on the

bottom front with the center line marked

window stool.

Cabinet

Track hole

Support

Bracket

Carriage bolt and lock nut

Machine screw(Type D) and lock nut

Outer edge of window sill

Screw(Type B)

Sill bracket Fig. 6

Features and Installation

3.Using the M-screw and the lock nut, attach the support bracket to the cabinet track hole. Use the first track hole after the sill bracket on the outer edge of the window sill. Tighten the carriage bolt and the lock nut. Be sure the cabinet slants outward.

CAUTION: DO NOT DRILL A HOLE IN THE BOTTOM PAN.

The unit is designed to operate with approximately 1/2" of water in bottom pan.

4.Pull the bottom window sash down behind the Top retainer bar until they meet.

NOTE: 1. Do not pull the window sash down so tightly that the movement of Frame curtain is restricted. Attach the cabinet to the window stool by driving the screws (Type B) through the cabinet into window stool.

2.The cabinet should be installed with a very slight tilt downward toward the outside.

Top
retainer
bar	Window stool
Front angle	Fig. 7
Window sash Top retainer bar
Foam-PE
Cabinet
Frame curtain
Foam-PE
	Fig. 8
	Sash track

	Front Angle
Screw(Type B)	Fig. 9

12