- 114 -
2 Select the menu.
3 Specify the starting position for the
scene.
Play back to near the position where you
wish the scene to start, then pause
playback and specify the starting position
precisely using frame-by-frame playback.
The pause position will be the starting position of the scene.
If you wish the split scene to start from the beginning of the scene, go
to Step 4.
Operations
4 Tilt the SET button up.
5 Specify the end position for the scene.
The screen for specifying the end position of the scene appears.
Set the end position by performing the same operations as when
setting the start position.
The portions displayed in green are saved.
If you wish to splice a preceding section to
a subsequent section, tilt the SET button
down. Each downward tilt of the SET
button changes the section to be deleted.
6 Press the button or the
recording start/stop button.
[MENU]: # [EDIT VIDEO] # [ (SPLIT)]
Play back With the unit paused, tilt the SET button to the
right for approximately 2 seconds to play back
normally, and to the left to play back in the
reverse direction.
Pause During playback, press the SET button.
Fast forward/
rewind
During playback, you can change the playback
speed by tilting the SET button right or left.
Frame-by-frame With the unit paused, tilt the SET button to the
right to advance frame-by-frame, and to the left
to reverse frame-by-frame.
2