- 92 -
≥[SCENE MODE] will be set to (OFF) when the [ISO] is set to other
than AUTO while the [SCENE MODE] (l82) is set to
(FIREWORKS), (HDR (Backlight Comp.)), or (LOW
LIGHT).
≥If you register a shortcut function (l93) to the SET button, you can
change the ISO sensitivity setting from the recording screen.
Please refer to page 99.
The detected face is displayed in the frame.
∫About prioritised face framing
The prioritised face frame is displayed in
yellow. When the unit is set to Portrait mode
in Intelligent Auto Mode, the unit will focus
on the prioritised face frame and adjust the
brightness accordingly.
≥The grey frames are for face detection only.
≥When you press the button halfway while recording still pictures,
the unit focuses on the prioritised frame. When focus is achieved, the
prioritised frame turns green.
≥A maximum of 15 frames are detected, with the frames near the centre
of the screen and large frames being prioritised.
≥For still pictures with detected faces, is displayed on the 1-file
thumbnail display. (l60)
≥If the subject is small or dark on the LCD monitor, the unit may not be
able to detect it.
≥[SCENE MODE] will be automatically set to (OFF) when the
[FACE CHASER] is set to (ON) while the [SCENE MODE] (l82)
is set to (FI REWORKS), (LANDSCAPE), or (NIGHT
SCENERY).

[WHITE BALANCE]

[FACE CHASER]

[MENU]: # [FACE CHASER] # [(ON)]
3