- 38 -
Open the LCD monitor and press the power button to
turn on the unit.
The LCD monitor turns on.

About standby mode

When the LCD monitor is closed while the unit is on, the unit enters
standby mode which consumes very little power.
In standby mode, opening the LCD monitor turns on the unit, making the
unit ready for recording immediately. Use standby mode when you stop
using the unit but intend to use it again after a short time.
Preparation
Turning the unit on/off
HX-WA2 HX-DC2
To turn off the unit
Hold down the power button until the LCD monitor goes off.
≥Pressing the power button for a short time sends the unit into
sleep mode. (l39)