Panasonic HX-DC3 owner manual 145

	Power
Problem	Check points
This unit cannot be	≥ Remove the battery or AC adaptor, wait
operated though it	about 1 minute and then reconnect the
is turned on.	battery or AC adaptor. Then about 1 minute
	later, turn on the unit again. (Conducting the
This unit does not	above operation while the media is being
operate normally.	accessed may damage the data on the
	media.)
	≥ If normal operation is still not restored,
	detach the power connected, and contact
	consumer support.
A blinking high	≥ The battery temperature or unit internal
temperature	temperature (excluding battery) rises. Wait
warning icon	for the temperature to drop before using the
is shown, and the	unit again.
unit does not turn
on.
“ERROR	≥ Check each of the following items.
OCCURRED.	jRemove the SD card from the device and
PLEASE TURN	reinsert.
UNIT OFF, THEN	jRemove the battery and then put it in
TURN ON AGAIN.”	again.
is displayed.	jChange the SD card and check.
	≥ If a message is still displayed after checking
	the above, detach the power connected,
	contact consumer support.

- 145 -