Panasonic HX-DC3 owner manual Alert Sound, Display

≥Quick Start Standby Status will be unlocked after approximately 5 minutes and will switch to Standby Mode.

≥If [ECONOMY] (l 47) is activated and the device switches to Quick Start Standby Status automatically, pressing any button on the unit will switch to Recording Standby Status.

≥Depending on the recording conditions and menu settings, time for Quick Start may be longer than 0.5 seconds.

≥It may take some time for Automatic White Balance to adjust.

[ALERT SOUND]

Set the type and volume of operation sounds for the unit.

[TURN ON/OFF]:

Sets the sound emitted when the unit is turned on/off. ([ON]/[OFF])

[RECORD BEEP]:

Sets the sound emitted when recording is started and stopped. ([ON]/[OFF])

[SHUTTER]:

Sets the sound emitted when the button is pressed. ([OFF]/[A]/[B]/[C]/[D])

[KEY SW]:

Sets the sound emitted when the buttons (SET button, MENU button, etc.) are pressed. ([OFF]/[A]/[B]/[C]/[D])

[OPERATION VOL]:

Sets the volume of the operation sounds. ([1] to [7])

[ALL OFF]/[OPERATION SOUNDS ON]: Sets all operation sounds on/off

[DISPLAY]

Turns screen display [ON] (display) or [OFF] (not-display).

- 46 -