Panasonic HX-DC3 owner manual 147

	Recording
Problem	Check points
The unit arbitrarily	≥ Use an SD card that can be used for motion
stops recording.	picture recording. (l 16)
	≥ The recordable time may have shortened
	due to the deterioration of the data writing
	speed or repeated recording and deletion.
	Using the unit, format the SD card or built-in
	memory. (l 48)
Image not in focus.	≥ Hold down the power button until the LCD
	monitor goes off and then turn the power on
	again. When [FOCUS] is set to
	(MANUAL), do the above, then reconfigure
	the Manual Focus.
There is noise in	≥ When the [ISO] setting is too high, noise
the recording	may appear in the recorded images. Please
image.	lower the ISO sensitivity setting. (l 74)
Color balance of	≥ In a place with multiple light sources, such
images is strange	as a gymnasium or a hall, set the White
when recording in	Balance setting to	(INDOOR 2). If you
a place such as a	cannot record clearly with the
gymnasium.	(INDOOR 2), set it to		(WHITE SET).
	(l 81)
Color or	≥ Color or brightness of the image may
brightness of the	change, or you may see horizontal bars in
image changes, or	the image when the object is recorded
you may see	under fluorescent light, mercury light or
horizontal bars in	sodium light, etc., but this is not a
the image.	malfunction.
The LCD monitor	≥ Record in Intelligent Auto Mode.
flickers indoors.

- 147 -