Cleaning the Unit
∫Cleaning the paper and waiting sensors, double feed detector
How to clean sensors (detectors) and reflectors.
Remove the brush from the accessory blower and blow off the dirt with the blower.
Blower
Sensor or detector
1
2 Push the ADF door release to open the ADF door.
3 Blow off the dirt on the surface of the paper sensor and waiting sensor with an accessory blower.
4 And also blow off the dirt on the surface of the reflector sheet for the waiting sensor with the accessory blower.
5 Blow off the dirt from the double feed detector (G) and double feed detector
(R) with the accessory blower.
6 Close the ADF door.
≥When you close the ADF door, close it securely until it is locked.
| Reflector sheet | |
Waiting sensor | for waiting sensor | |
Paper sensor | ||
|
Double feed detector (G)
Double feed detector (R)
32