Turn off the scanner.
Pull the exit door release to open the exit door.
Cleaning the Unit
∫Cleaning the starting, skew and ending sensors
How to clean sensors (detectors) and reflectors.
Remove the brush from the accessory blower and blow off the dirt with the blower.
Blower
Sensor or detector
1
2
3 Blow off the dirt on the surface of the starting, skew (L), skew (R), and ending sensors with the accessory blower.
Ending sensor
Skew (R) sensor
Skew (L) sensor Starting sensor
4 And blow off the dirt from the reflector sheets for the starting, skew (L), skew (R), and ending sensors with the blower.
5 Close the exit door.
≥When you close the exit door, close it securely until it is locked.
Reflector sheet for | Reflector sheet for |
skew (R) sensor | ending sensor |
Reflector sheet for |
|
starting sensor |
|
Reflector sheet |
|
for skew (L) |
|
sensor |
|
33