Panasonic KV-S7075C 1, 2, 3

Clearing Paper Jams

Torn documents, thin documents or documents that are creased on the top edge may cause paper jams. If a paper

jam occurs, remove the jammed sheet according to the following procedure.

∫Removing paper jams from the paper slot

1Push the ADF door release to open the

ADF door.

2Pull the jammed document towards the

paper slot.

≥When the jammed paper cannot be

removed, remove it from the exit path.

Refer to page 31.

≥When only the bottom end of jammed

paper is visible, open the exit door while

leaving the ADF door open to remove the

jammed paper. Pulling the jammed paper

with the ADF door closed may damage

the document.

3Close the ADF door.

≥When you close the ADF door, close it

securely until it is locked.

ADF door

ADF door release

ADF door

Contents

Main Introduction About the documentation International ENERGY STAR Program Abbreviations Trademarks System Requirements Federal Communications Commission Requirements (For United States only) For FRG Users (For Germany Only) Table of Contents Before You Sta rt Appendix Operation Care and Maintenance For Your Safety For Users WARNING Power and Ground Connection WARNING CAUTION CAUTION Power Installation and Relocation Operating Safeguards Hollows Safety Information (For United Kingdom only) WARNING IMPORTANT Precautions Installation CD-ROM Roller Cleaning Paper Others Precautions Illegal Duplication Security Notice Caution Labels Component Identification Page Component Identification Power turn-on sequence 1 About the power indicator (LED) Loading Documents on the ADF Acceptable documents Feeding direction Documents must also meet the following conditions Feeding direction Less than 5 mm (0.2 in.) Notes about documents for scanning Scanning documents with pages of same sizes 2 3 4 5 6 7 8 Scanning documents with pages of different sizes 1 2 3 4 5 6 7 8 9 Adjusting the left and right document guides to their original position 1 2 3 Loading Documents on the Flatbed When scanning with the flatbed 1 2 3 Loading Documents on the Flatbed 4 5 6 7 Scanning thick documents Using Control Sheets A B Using Control Sheets About Printing Control Sheets 1 2 3 4 Center of the page Changing the Reference Plate Setting ADF reference plate setting 3 4 Page Clearing Paper Jams Removing paper jams from the paper slot 1 2 3 Clearing Paper Jams Removing paper jams from the exit path 1 2 3 Cleaning the Unit Outside of the scanner 2 3 Inside the scanner Cleaning the paper feed roller, separation roller, and double feed prevention roller 4 5 6 7 8 Cleaning the drive rollers and free rollers 4 5 Cleaning the drive rollers, free rollers, and exit rollers 4 Page Cleaning the paper and waiting sensors, double feed detector 3 4 5 6 Cleaning the starting, skew and ending sensors 3 4 5 Page Page Page Page Page Troubleshooting Symptom Possible Cause Remedy Troubleshooting Symptom Possible Cause Remedy Shading Adjustment Repacking Instructions 1 2 3 Specifications Specifications Index A B C D P R S T U