Panasonic KV-S7075C 2, 3

Loading Documents on the ADF

∫Scanning documents with pages of same sizes

Cautions:

≥Please remove any staples from the document before scanning.

≥Glued or curled documents may cause a paper jam or damage the unit, so please scan using the flatbed.

1Set the manual feed selector to [AUTO]

or [MANUAL].

[AUTO]: Auto feeding

[MANUAL]: Manual feeding

≥When manually feeding a document, feed

the document 1 page at a time.

≥When scanning important documents or

bound documents, feed them manually.

2Documents that have been stapled

together or stacked together (as in a

file folder) will need to be separated.

1Fan the stack of documents to

separate all the edges.

2Hold both ends and bend the

documents as shown in the

illustration.

3To flatten the documents, hold firmly

and pull them apart as shown in the

illustration.

Repeat these steps as necessary.

3Carefully align the documents.

Manual feed

selector

[AUTO]

Manual feed

selector

[MANUAL]

Contents

Main Introduction About the documentation International ENERGY STAR Program Abbreviations Trademarks System Requirements Federal Communications Commission Requirements (For United States only) For FRG Users (For Germany Only) Table of Contents Before You Sta rt Appendix Operation Care and Maintenance For Your Safety For Users WARNING Power and Ground Connection WARNING CAUTION CAUTION Power Installation and Relocation Operating Safeguards Hollows Safety Information (For United Kingdom only) WARNING IMPORTANT Precautions Installation CD-ROM Roller Cleaning Paper Others Precautions Illegal Duplication Security Notice Caution Labels Component Identification Page Component Identification Power turn-on sequence 1 About the power indicator (LED) Loading Documents on the ADF Acceptable documents Feeding direction Documents must also meet the following conditions Feeding direction Less than 5 mm (0.2 in.) Notes about documents for scanning Scanning documents with pages of same sizes 2 3 4 5 6 7 8 Scanning documents with pages of different sizes 1 2 3 4 5 6 7 8 9 Adjusting the left and right document guides to their original position 1 2 3 Loading Documents on the Flatbed When scanning with the flatbed 1 2 3 Loading Documents on the Flatbed 4 5 6 7 Scanning thick documents Using Control Sheets A B Using Control Sheets About Printing Control Sheets 1 2 3 4 Center of the page Changing the Reference Plate Setting ADF reference plate setting 3 4 Page Clearing Paper Jams Removing paper jams from the paper slot 1 2 3 Clearing Paper Jams Removing paper jams from the exit path 1 2 3 Cleaning the Unit Outside of the scanner 2 3 Inside the scanner Cleaning the paper feed roller, separation roller, and double feed prevention roller 4 5 6 7 8 Cleaning the drive rollers and free rollers 4 5 Cleaning the drive rollers, free rollers, and exit rollers 4 Page Cleaning the paper and waiting sensors, double feed detector 3 4 5 6 Cleaning the starting, skew and ending sensors 3 4 5 Page Page Page Page Page Troubleshooting Symptom Possible Cause Remedy Troubleshooting Symptom Possible Cause Remedy Shading Adjustment Repacking Instructions 1 2 3 Specifications Specifications Index A B C D P R S T U