Panasonic KV-S7075C 4, 5, 6, 7

Loading Documents on the Flatbed

25

4Match the shorter side of the document

with the left edge of the flatbed glass.

5Match the longer side of the document

with the standard mark.

≥If the document is slanted, it will not be

scanned properly.

6Close the document cover gently.

≥If the document cover is slammed, the

document will move and may not be

scanned properly.

≥Do not open or press down on the

document cover during scanning.

≥Be sure to close the document cover

before use.

≥After scanning, open the document cover

and remove the document.

7Open your scanning application*1 and scan the documents.

*1 The software RTIV and QuickScanPro demo, included with the scanner, can be used for scanning the

documents.

∫Scanning thick documents

When scanning thick documents such as a book, please note the following items:

≥Please note that areas of the document which are not touching the flatbed glass will not be scanned properly.

≥If the document moves during scanning, please note that it will not be scanned properly.

Standard mark

Document

Longer side

Shorter side

Flatbed glass

Contents

Main Introduction About the documentation International ENERGY STAR Program Abbreviations Trademarks System Requirements Federal Communications Commission Requirements (For United States only) For FRG Users (For Germany Only) Table of Contents Before You Sta rt Appendix Operation Care and Maintenance For Your Safety For Users WARNING Power and Ground Connection WARNING CAUTION CAUTION Power Installation and Relocation Operating Safeguards Hollows Safety Information (For United Kingdom only) WARNING IMPORTANT Precautions Installation CD-ROM Roller Cleaning Paper Others Precautions Illegal Duplication Security Notice Caution Labels Component Identification Page Component Identification Power turn-on sequence 1 About the power indicator (LED) Loading Documents on the ADF Acceptable documents Feeding direction Documents must also meet the following conditions Feeding direction Less than 5 mm (0.2 in.) Notes about documents for scanning Scanning documents with pages of same sizes 2 3 4 5 6 7 8 Scanning documents with pages of different sizes 1 2 3 4 5 6 7 8 9 Adjusting the left and right document guides to their original position 1 2 3 Loading Documents on the Flatbed When scanning with the flatbed 1 2 3 Loading Documents on the Flatbed 4 5 6 7 Scanning thick documents Using Control Sheets A B Using Control Sheets About Printing Control Sheets 1 2 3 4 Center of the page Changing the Reference Plate Setting ADF reference plate setting 3 4 Page Clearing Paper Jams Removing paper jams from the paper slot 1 2 3 Clearing Paper Jams Removing paper jams from the exit path 1 2 3 Cleaning the Unit Outside of the scanner 2 3 Inside the scanner Cleaning the paper feed roller, separation roller, and double feed prevention roller 4 5 6 7 8 Cleaning the drive rollers and free rollers 4 5 Cleaning the drive rollers, free rollers, and exit rollers 4 Page Cleaning the paper and waiting sensors, double feed detector 3 4 5 6 Cleaning the starting, skew and ending sensors 3 4 5 Page Page Page Page Page Troubleshooting Symptom Possible Cause Remedy Troubleshooting Symptom Possible Cause Remedy Shading Adjustment Repacking Instructions 1 2 3 Specifications Specifications Index A B C D P R S T U