Wall Mounting
CAUTION:
Do not mount this unit on a wall while attached to a DPT.
Doing so may damage the wall mounting adaptor or, may cause the unit to fall, possibly resulting personal injury.
1.Remove the wall mounting
adaptor from the unit as shown.
2.Set the operation board to level 1, then connect and secure the telephone line cord.
3.Attach the wall mounting adaptor
as shown.
• Make sure the cord is not pinched by the wall mounting adaptor. When running the cord from the top of the unit, look through the opening in the wall mounting adaptor (A) to confirm that the cord is not being pinched.
4.Drive the 2 screws (included) into the wall either 83 mm
•You can find a wall mounting template on page 8.
•Make sure that the wall that the unit will be attached to is strong enough to support the unit (approx. 1 kg [2.2 lb]).
•Make sure the cord is securely fastened to the wall.
•When this unit is no longer in use, make sure to detach it from the wall.
83 mm
100 mm 
Washer
Drive the screw to this point.
4 | Document Version |
