Error Messages
64 For fax advantage assistance, call 1-800-435-7329.
Help
Reports If your unit cannot send a fax, check the following:
–The number you dialed is correct.
–The other party’s machine is a facsimile.
If the problem remains, correct it by following the communication message printed on the sending and
journal reports (page 42).
COMMUNICATION ERROR
(Code: 40-42, 46-72, FF)
LA transmission or reception error occurred.
Try again or check with the other party.
COMMUNICATION ERROR
(Code: 43, 44)
LA line problem occurred. Connect the
telephone line cord to a different jack and try
again.
LAn overseas transmission error occurred. Try
using the overseas mode of feature #23
(page 61).
DOCUMENT JAMMED
LThe document is jammed. Remove the
jammed document (page 73).
ERROR-NOT YOUR UNIT
(Code: 54, 59, 70)
LA transmission or reception error occurred
because of a problem with the other party’s
fax machine. Check with the other party.
MEMORY FULL
LThe document was not received as a result of
the memory being full.
NO DOCUMENT
LThe document was not fed into the unit
properly. Reinsert the document and try
again.
OTHER FAX NOT RESPONDING
LThe other party’s fax machine is busy or has
run out of recording paper. Try again.
LThe document was not fed properly. Reinsert
the document and try again.
LThe other party’s fax machine rings too many
times. Send the fax manually (page 41).
LThe other party’s machine is not a facsimile.
Check with the other party.
LThe number you dialed is not in service.
PRESSED THE STOP KEY
L{
{{
{STOP}
}}
} was pressed and fax
communication was canceled.
THE COVER WAS OPENED
LThe printer cover was opened. Close it and
try again.
OK
LFax communication was successful.