6
1. Installation and Quick Start
1.4 Recording paper
AOpen the cover by pressing the cover open
button (1).
BInstall the recording paper.
CInsert the leading edge of the paper into the
opening above the thermal head (1).
DPull the paper out of the unit.
LMake sure that there is no slack in the
paper roll.
EClose the cover securely by pushing down on
both sides.
FFor KX-FT902:
Press {FAX/START}, then tear off the
excess paper by pulling it towards you.
For KX-FT904/KX-FT908:
Press {FAX/START} to cut the paper.
Correct
Incorrect
1
1
Note:
LIf the paper is secured with glue or tape,
cut approximately 15 cm from the
beginning of the roll before installing it.
LWhen the power cord is connected, a
message is printed each time the cover is
opened then closed. If the recording paper
is installed upside down, the message will
not be printed. Install the paper correctly.
LFor accessory information, see page 4.
{FAX/START}
FT-902-904-908HK.book Page 6 Tuesday, June 15, 2004 5:44 PM