|
| Operating Instructions |
|
|
|
Problem |
| Cause and Remedy |
|
| |
Power LED continues | Please check whether you can access the camera with your | |
blinking after turn on | browser. | |
the Network Camera. | • If you can access the camera and the screen is Update | |
| ||
| Firmware page, you should do Update Firmware | |
| procedure. | |
| • If you can not access the camera, the | |
| hardware is defective. Please call our customer call | |
| center. | |
|
| |
Renewal of an image is | • The number of the renewal frames of an image of a | |
slow. | camera changes from the following contents. | |
| • | Setting : |
|
| View mode/Image Resolution/Image Quality/ |
|
| Network Bandwidth usage |
| • | Use environment : |
|
| the personal computer performance currently used, |
|
| Network environment, subject conditions |
|
| (Brightness, subject, etc.) |
| • Renewal of an image becomes slow by two or more | |
| users' simultaneous access. | |
| For this reason, the performance indicated to Specification | |
| may not come out according to the above conditions. | |
| • On | |
| please use Ethernet Switching Hub. (If Ethernet | |
| Switching Hub is not used, the renewal of an image of | |
| each screen may become slow.) | |
|
|
|
84