Panasonic KX-HCM10 manual 85

Operating Instructions

Problem					Cause and Remedy
Update Firmware is	When it becomes impossible to access a camera by the
not carry out a normal	reason of power supply OFF, network troubles, and others at
end.	the time of Update Firmware, it connects in the following
	procedure.
			The power supply of a camera and Computer is re-switched on.
		The IP address when the ability to have accessed normally is specified ￿
		to be URL of a browser, and access is tried to a camera.
								Yes
					Can you access the camera?
						No
				The CLEAR SETTING button of a camera is pushed.￿
				Then, reconfigure the Network Camera with Network￿
				Configuration software in CD-ROM. And access again.
									No
					Is the screen displayed Top Page?
					Yes
							It is the same as that of usual ￿
				Please check the
							Update Firmware. Please perform			￿
				Setup Page version No.
							Update Firmware according to ￿
					No		Page 65.
				Is the Version
				wished number?
					Yes
					Update Firmware is completed.
If you cannot solve	• Call our customer call center at
your problem	1-800-272-7033

•After the limited warranty, call our Continued Services Technical Support Line at

1-900-555-PANA(1-900-555-7262)

[For assistance : 1-800-272-7033] 85