24
L-mode service
Sending an e-mail
1Press (L-mode), then press .
2Press (L-mode).
E-mail address
Title
Message
3Enter the desired e-mail address, up to 50 characters
(see the table on page 9 for instructions), then press
(Register).
●You can enter the e-mail address using the
addressbook.
1. Press (Menu) and .
2. Press (Search button) to select the
desired party.
(Or enter the other party’s initial of the name,
then press .)
3. Press (Set).
4Press (Search button) to select the title
column, then press (L-mode).
7Enter your e-mail message, up to 2000 characters
(see the table on page 9 for instructions), then press
(Register).
8■To send the e-mail
Press (Menu) and .
●Your e-mail will be sent.
■To stop writing the e-mail and save it
Press (Menu) and .
9When the following is displayed, press (L-mode)
to disconnect the line.
10Press (Stop).
5Enter the title of your e-mail, up to 60 characters (see
the table on page 9 for instructions), then press
(Register).
6Press (Search button) to select the
message column, then press (L-mode).