44
Installations and connections

Installing the ink film

2Insert the ink film.
Insert the white core into the slots shown in the
picture below.
1Open the control panel.
Find the T shaped gear (blue).
Ink film
Insert the blue core into the right slot of the main
unit.
Insert the T shaped gear (blue) into the left slot of
the main unit.
Blue core
“T” shaped
gear (blue)
Right slot
T shaped gear (blue) Do not be
slacken.
Control panel
Press here.
Open the control
panel until it locks.
If the ink film is slack, tighten it by winding the T
shaped gear.
3Close the control panel until it locks.