DCS BGB48-BQR, BGB48-BQAR manual Lp Tank Restraint For Built-In Installation, 18” max, Gas Hook-Up

INSTALLATION

GAS HOOK-UP

LP TANK RESTRAINT FOR BUILT-IN INSTALLATION

If the grill is to be installed in a Built-in application, then the grill must be installed in accordance with the Built–in installation guidelines.

If you intend to operate your Built-in grill on LP gas utilizing a 20 lb Type 1 cylinder, then the Built-in LP tank restraint must be installed prior to initial use of the grill. If you do not have one please contact DCS Customer Care at (888) 281-5698 for information on obtaining one.

The following steps will illustrate how to properly locate and install the LP tank restraint within the Built-in enclosure.

NOTE:

The grill comes with the LP Regulator/Hose assembly installed at the factory. The assembly, along with the entire grill system, is leak tested.

Do not remove the Regulator/Hose assembly from the grill during installation.

The maximum distance from the center of the manifold cut out to the center of the tank restraint is 18 inches.

18” max.

Center of Tank Restraint must be placed within this area to avoid causing stress on the LP regulator hose connection.

Center of manifold cut out projected to floor of the island.

FIG. 10

14