Headset Installation
Your telephone may be used with an optional headset. To use this feature, simply plug the headset into the headset jack on the handset. Your telephone is ready for handsfree conversation.
Setting the Dial Mode Switch
Place the switch in the “Tone” position for tone dialing, or the “Pulse” position for pulse dialing.
The ability to pulse dial is dependent upon the telephone system and/or the outside lines to which the Dterm Analog Cordless is connected.
Charging the Battery
The plastic connectors will fit together only one way. Make sure the battery connector is properly aligned.
Before plugging the telephone line into your new telephone, the rechargeable
1.Remove the handset battery cover.
2.Plug the battery cable into the handset and place the battery pack inside the battery compartment.
3.Replace the battery cover.
4.Place the handset on the base to charge. (The handset can charge in either the
Low Battery Indicator
When the battery pack in the handset needs to be charged, the talk/battery low indicator flashes. If this occurs while you are on the telephone, you will hear an alert tone. Complete your call as quickly as possible and return the handset to the base unit for charging.
Cleaning Battery Contacts
To maintain a good charge, it is important to clean all battery contacts on the handset and base unit about once a month. Use a dry cloth or pencil eraser, if necessary. Do no use any liquids or solvents.
6
