Panasonic KX-PRXA10 installation manual Setup wizard, Registration dialog

Installation

Charging the handset

Charge the handset for about 5 hours before initial use. The charge indicator (A) lights while the handset is charging and turns off when the handset is fully charged.

Important:

RIf the handset is placed into the charger while talking on the phone, the call is not disconnected.

A

A

or

Place the handset into the charger.

Connect a USB cable (not supplied) directly to the handset.

Turning on the handset

To turn the handset on, press and hold the power button on the top of the handset.

Setup wizard

The first time you turn on the handset, the setup wizard prompts you to configure initial settings such as the display language. Follow the on-screen instructions to configure the handset.

Registration dialog

While using the setup wizard, a dialog may be displayed prompting you to press the MN on the base unit for 5 seconds. Follow the on-screen instructions to register the handset to the base unit. When registration is complete, continue to follow the setup wizard.

Registering the handset to the base unit

If the handset is not registered, the registration dialog (page 4) is displayed. Follow the on-screen instructions to register the handset to the base unit.

If you cancel this dialog, you can display it again by tapping [Landline] in the home screen or app list, and then tapping [Landline settings] a [Initial settings].

4For assistance, please visit http://www.panasonic.com/help